Load data for .30 PICRA + .308 | 150gr | CutEdge MTH

Recommended Powder(s):

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 150gr \| CutEdge MTH
Manufacturer SKU:	MTH 308 150
Bullet Weight:	150gr \| 9.7g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	1.242" \| 31.5mm
Caliber:	.30 PICRA load data
Case Length (l3):	1.291" \| 32.8mm
Cartridge Length (C.O.L.):	2.172" \| 55.2mm
Seated Depth:	0.361" \| 9.2mm
Shank Seated Depth:	0.125" \| 3.2mm
Case Capacity:	24.2 Grains of Water \| 1.57 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	40611 psi \| 2800 bar
LID:	LID_B8478_C311
Last updated:	2026-01-20

Load data for 76 loads in caliber .30 PICRA with .308 | 150gr | CutEdge MTH bullet and 38 powder(s). The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	76%	35839	88%	**63	100%
ADI APS 350	<<locked>>	64%	36506	90%	**17	100%
ADI APS 450	<<locked>>	64%	35694	88%	**33	100%
ADI AS 30	<<locked>>	63%	35926	88%	**56	100%
Accurate 4100	<<locked>>	77%	35795	88%	**48	90%
[Accurate No. 11 FS]*	<<locked>>	87%	36521	90%	**68	83%
Accurate No. 9	<<locked>>	66%	35911	88%	**35	96%
Accurate Solo 1000	<<locked>>	62%	35795	88%	**83	100%
Accurate Solo 1250	<<locked>>	64%	35331	87%	**22	100%
Accurate TCM	<<locked>>	66%	35998	89%	**29	96%
Alliant 2400	<<locked>>	74%	35563	88%	**45	93%
Alliant BLUE DOT	<<locked>>	77%	36521	90%	**32	98%
Alliant UNIQUE	<<locked>>	63%	36274	89%	**91	100%
Baschieri & Pellagri 100	<<locked>>	62%	35955	89%	**86	100%
Baschieri & Pellagri 102 Pistol	<<locked>>	77%	35694	88%	**93	100%
Hodgdon Clays	<<locked>>	63%	35897	88%	**17	100%
[Hodgdon H110]*	<<locked>>	83%	36419	90%	**81	87%
Hodgdon LilGun	<<locked>>	84%	36158	89%	**21	94%
Lovex D037.2	<<locked>>	65%	35911	88%	**35	96%
Maxam CSB 1	<<locked>>	67%	36187	89%	**22	100%
Maxam CSB 3	<<locked>>	63%	35360	87%	**93	100%
Ramshot Enforcer	<<locked>>	75%	36332	89%	**65	94%
ReloadSwiss RS 20	<<locked>>	64%	35766	88%	**75	100%
ReloadSwiss RS 24	<<locked>>	64%	35534	87%	**06	100%
[ReloadSwiss RS 30]*	<<locked>>	97%	33344	82%	**52	88%
Rottweil P 806	<<locked>>	65%	35795	88%	**83	100%
SNPE Vectan A0	<<locked>>	66%	35868	88%	**58	100%
SNPE Vectan BA6 1/2	<<locked>>	96%	31270	77%	**83	94%
SNPE Vectan BA7 1/2	<<locked>>	70%	36405	90%	**27	100%
Shooters World Heavy Pistol	<<locked>>	65%	35911	88%	**35	96%
[Somchem S265]*	<<locked>>	90%	35795	88%	**29	86%
Vihtavuori 3N37	<<locked>>	63%	35926	88%	**24	100%
Vihtavuori 3N38 👍	<<locked>>	72%	35766	88%	**99	100%
Vihtavuori N105	<<locked>>	76%	36129	89%	**22	100%
Vihtavuori N110	<<locked>>	92%	35491	87%	**75	94%
Vihtavuori N32C Tin Star	<<locked>>	82%	36013	89%	**30	100%
Vihtavuori N350	<<locked>>	66%	35853	88%	**17	100%
[Winchester 296]*	<<locked>>	83%	36521	90%	**04	83%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	60%	23337	57%	**76	100%
ADI APS 350	<<locked>>	61%	33620	83%	**4	100%
ADI APS 450	<<locked>>	61%	33011	81%	**7	100%
ADI AS 30	<<locked>>	61%	34389	85%	**40	100%
[Accurate 4100]*	<<locked>>	62%	21611	53%	**02	80%
[Accurate No. 11 FS]*	<<locked>>	83%	31676	78%	**93	80%
Accurate No. 9	<<locked>>	61%	29820	73%	**43	93%
Accurate Solo 1000	<<locked>>	61%	34360	85%	**66	100%
Accurate Solo 1250	<<locked>>	61%	32445	80%	**86	100%
Accurate TCM	<<locked>>	61%	29834	73%	**37	94%
[Alliant 2400]*	<<locked>>	61%	23728	58%	**38	85%
Alliant BLUE DOT	<<locked>>	61%	23221	57%	**12	93%
Alliant UNIQUE	<<locked>>	61%	33736	83%	**58	100%
Baschieri & Pellagri 100	<<locked>>	61%	34606	85%	**70	100%
Baschieri & Pellagri 102 Pistol	<<locked>>	60%	23511	58%	**8	100%
Hodgdon Clays	<<locked>>	61%	34389	85%	**7	100%
[Hodgdon H110]*	<<locked>>	73%	25802	64%	**11	80%
[Hodgdon LilGun]*	<<locked>>	65%	18681	46%	**93	80%
Lovex D037.2	<<locked>>	61%	30893	76%	**60	93%
Maxam CSB 1	<<locked>>	61%	30980	76%	**66	100%
Maxam CSB 3	<<locked>>	61%	33982	84%	**76	100%
[Ramshot Enforcer]*	<<locked>>	61%	23018	57%	**38	86%
ReloadSwiss RS 20	<<locked>>	61%	33156	82%	**45	100%
ReloadSwiss RS 24	<<locked>>	61%	32271	79%	**57	99%
[ReloadSwiss RS 30]*	<<locked>>	84%	23641	58%	**78	80%
Rottweil P 806	<<locked>>	61%	30850	76%	**17	100%
SNPE Vectan A0	<<locked>>	61%	30879	76%	**02	100%
[SNPE Vectan BA6 1/2]*	<<locked>>	71%	15693	39%	**8	80%
SNPE Vectan BA7 1/2	<<locked>>	61%	27572	68%	**12	100%
Shooters World Heavy Pistol	<<locked>>	61%	30893	76%	**60	93%
[Somchem S265]*	<<locked>>	80%	27282	67%	**84	80%
Vihtavuori 3N37	<<locked>>	61%	33547	83%	**98	100%
Vihtavuori 3N38	<<locked>>	61%	25367	62%	**35	97%
Vihtavuori N105	<<locked>>	61%	22234	55%	**09	99%
[Vihtavuori N110]*	<<locked>>	70%	17999	44%	**43	80%
Vihtavuori N32C Tin Star	<<locked>>	67%	26600	65%	**2	100%
Vihtavuori N350	<<locked>>	61%	30763	76%	**58	100%
[Winchester 296]*	<<locked>>	78%	30777	76%	**16	80%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data